Manual

3. Press the button START (B) to activate the machinery control buttons (D).
4. Push a machinery control button to control a function on the machine.
à The indicator light STATUS (C) briefly lights up GREEN under normal operation.
5. After use or in case of an emergency, push the emergency control button to disable all buttons.
Important:
Batteries:
– Replace the batteries immediately if the indicator light STATUS flashes RED.
– Remove the batteries if you do not use the transmitter for longer periods of time. Leaking batteries can cause
damage to the transmitter.
Important:
Unauthorised access:
Prevent unauthorised access to the transmitter. Store the transmitter in a secure location.
11 Troubleshooting
11.1 Indications
Problem Possible cause Suggested solution
Indicator light STATUS flashes
GREEN
Receiver without power Check power supply to receiver.
Check if receiver fuse(s) are blown:
1. Switch off the power supply to
the receiver.
2. Remove the receiver cover.
3. Inspect the fuses for damage.
4. Replace blown fuses.
Indicator light STATUS flashes RED
Transmitter batteries depleted. Replace transmitter batteries.
Contact springs in transmitter battery
compartment are corroded.
Clean contact springs in the trans-
mitter battery compartment.
28