Manual
Table Of Contents
- Title Page
- 2832829 2832831-de
- 1 Einführung
- 2 Bestimmungsgemäße Verwendung
- 3 Lieferumfang
- 4 Aktuelle Bedienungsanleitungen
- 5 Merkmale und Funktionen
- 6 Symbolerklärung
- 7 Sicherheitshinweise
- 8 Übersicht über den Sender
- 9 Anschluss und Verdrahtung
- 10 Verwenden der Funkfernsteuerung
- 11 Problembehandlung
- 12 Reinigung
- 13 Wartung
- 14 Konformitätserklärung (DOC)
- 15 Entsorgung
- 16 Technische Daten
- 2832827, 2832829, 2832830, 2832831-en
- 1 Introduction
- 2 Intended use
- 3 Delivery contents
- 4 Up-to-date operating instructions
- 5 Features
- 6 Description of symbols
- 7 Safety instructions
- 8 Transmitter overview
- 9 Installation
- 10 Operating the controller
- 11 Troubleshooting
- 12 Cleaning
- 13 Maintenance
- 14 Declaration of Conformity (DOC)
- 15 Disposal
- 16 Technical data
9.4 Technical drawing (No. 2832830 / 2832831)
9.5 Installing batteries into transmitter
1. At the rear of the transmitter, unscrew the battery compartment cover.
2. Remove the battery compartment cover.
3. Insert 2x 1.5 V AA batteries into the battery compartment. Slide the fabric battery removal tape under the bottom
battery. Observe the polarity markings in the battery compartment.
4. Replace the battery compartment cover.
à The transmitter is ready for use
10 Operating the controller
Note:
Receiver and transmitter are paired during production and do not need to be paired before operation.
BA
C
D
To operate the controller:
1. Supply the receiver with power.
2. Rotate the emergency control button (A) until it pops upwards (disengages).
27