Datasheet

Distributed by Conrad Electronic SE • Klaus-Conrad-Str. 1 • D-92240 Hirschau
Datasheet
Item no. 1497956
V1_09262017_01_en
2
This is a publication by Conrad Electronic SE, Klaus
-
Conrad
-
Str. 1, D
-
92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction
by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require t
he prior written approval by
Panel Housing: Zn Alloy, Ni Plating
USB Receptacle Housing: PBT
USB Receptacle Contacts: Copper Alloy, Au Plating
USB Receptacle Shell: Copper Alloy, Ni Plating
Panel O-Ring: Silicone
Panel hex Nut: Zn Alloy, Ni Plating
Glue: Epoxy
Cable End Screw Nut: Zn Alloy, Ni Plating
USB Plug Housing: PBT
USB Plug Contacts: Copper Alloy, Au Plating
USB Plug Shell: Copper Alloy, Ni Plating
Cable End Rubber Pad: Silicone
Inner Mold: PE
Over Mold: PVC
Technical Data
Visual and Dimensional Inspection: Must meet or exceed the requirements specified by the
most current version of the USB Specification.
Insulation Resistance: DC500V ±10%, test for 1 min. and the insulation resistance should be
more than 100MΩ
Dielectric Withstanding Voltage: 500V DC/AC peak, contact-to-contact, for 1 min.
750V DC/AC peak, contact-to-test panel or contact-to-shield for 1 min.
Contact Resistance: 30mΩ at 10mA Max.
Insertion and withdrawal forces: Speed: 10 mm/s max.