User manual

Connection
Ensure that the voltage supply source is turned off when you connect the
inverter. Otherwise, there is a danger of electric shock.
Never bring unconnected ports into contact with other cables or metal objects.
Otherwise, there is a danger of electric shock.
Be especially careful with cables connecting the inverter and the cold-cathode
lamps. The high voltage can damage electronic components.
1. Connect the loose cable ends with a suitable connector plug, which is to be plugged into a
suitable voltage supply source. Observe the correct polarity (red = positive / black = negative).
2. Connect the cable’s other end into the matching socket on the inverter.
3. Now connect one or two cold-cathode lamp to the inverter.
4. Now you can switch on the supply voltage.
Use a double-sided adhesive tape to secure the inverter in a suitable position.
Care and cleaning
• Disconnect the product from the power supply before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Cleantheproductwithadry,ber-freecloth.
• Do not immerse the product in water.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
 You thus full your statutory obligations and contribute to the protection of the
environment.
Technical data
Item no. 1571328 1570569
Input voltage/current 12 V/DC / 600 mA 12 V/DC / 400 mA
Output voltage/current 550 V/AC / 6 mA 350 V/AC / 6 mA
Output starting voltage 900 V/AC 600 V/AC
Frequency 32 kHz
Operating temperature 0 to +45 ºC
Storage temperature -10 to +65 ºC
Dimensions (W x H x D) 78 x 15 x 23 mm
Operating instructions
Inverter for cold-cathode lamp
Item no. 1571328 300 mm
Item no. 1570569 150 mm
Intended use
The inverter is designed to supply one or two cold-cathode lamps (not included in delivery) with
power. The inverter requires a 12 V/DC power supply.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
Inaddition,improperusecancausehazardssuchasshortcircuiting,re,electricshocketc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Inverter
• Connection cable
• Double-sided adhesive tape
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual that absolutely have to be observed.
 Thearrowsymbolindicatesspecictipsandadviceonoperation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity,moisture,ammablegases,vapoursandsolvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance,modicationsand repairs aretobe performed exclusivelybyan
expertorataqualiedshop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in
part, is prohibited. This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1570569_1571328_V1_0418_02_mxs_m_en