Datasheet

Blue Dot Laser Module
Model no. LM05BUD
Item no. 1564576
ATTENTION
LASER RADIATION HAZARD
AVOID DIRECT RADIATION OF THE EYES
CLASS 3R LASER PRODUCT
Output: < 5 mW; Wavelength: 405 nm; EN 60825-1:2007
• Adjustments or maintenance should only be carried out by trained professionals who are aware of the dangers. Improperly executed adjustments might result in
dangerous laser radiation.
• For safety reasons, any unauthorised conversion and/or modication to the product is not permitted.
• Before the product is rst put into operation, the operator must notify the responsible accident insurer and the public authority responsible for occupational health
and safety (generally the industrial inspectorate) and name a person who will be accountable for laser safety.
• When operating the laser equipment, always make sure that the laser beam is directed so that no one is in the projection area and that unintentional reected beams
(e.g. from reective objects) cannot be directed into areas where people are present.
• Laser radiation can be dangerous, if the laser beam or its reection enters unprotected eyes. Therefore, before using the laser equipment, familiarise yourself with
the statutory regulations and instructions for operating such a laser device.
• Never look into the laser beam and never point it at people or animals. Laser radiation may result in injuries to the eyes or skin.
• Do not point the laser beam at mirrors or other reective surfaces. The uncontrolled, reected beam may strike people or animals.
• Never leave the laser in operation unattended.
• If possible, restrict the range of radiation by using screens or partitions.
• Mark the range of the laser by barriers or by using warning signs.
• Wherever possible, direct the laser in such a way that it does not cross eye level.
• Caution: if operation settings or procedures other than those described here in these instructions are used, it could result in exposure to dangerous radiation.
• Never look directly into the laser beam when the device is in operation. The intense light rays could temporarily impair your eyesight. Moreover, they may trigger
epileptic seizures for vulnerable persons. This applies in particular to epileptics.
• If laser radiation enters your eyes, close your eyes immediately and move your head away from the beam.
• If your eyes have been irritated by laser radiation, do not continue to carry out tasks with safety implications, such as working with machines, working from great
heights or close to high voltage. Also, do not operate any vehicles until the irritation has completely subsided.
Specication
Wavelength ............................................ 405 nm ±5 nm
Optical Output Power ............................ < 5 mW
Stability .................................................. < 1 %
Laser Operation ..................................... continuous
Focus Lens ............................................ plastic
Beam Divergence .................................. < 0.8 mrad
Operating Voltage .................................. 4.8 – 5.0 V/DC
Operating Current .................................. < 55 mA
Electrical Connections ........................... cable: red (+), black (-),
Dimension .............................................. 19.5 mm x ø 8 mm
Cable ..................................................... approx. 100 mm
Operating Temperature .......................... -10 °C – 40 °C
Storage Temperature ............................. -20 °C – 65 °C
Distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau 1564576_V1_0418_02_mxs_hint sheet_en
DATASHEET