User manual

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in
part, is prohibited. This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1570051_1566297-8_V1_0218_02_mxs_m_en
Installation
Observe the current regulations during installation (touch protection) and the safety directions
in these operating instructions.
The board must be installed so that it cannot be accidentally touched.
Care and cleaning
Prior to working on the board, always pull the power plug or switch off the board’s
power supply.
The relay circuit board is maintenance-free. However, check the connection leads for
damage from time to time.
Only an authorised expert may perform repairs.
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
Clean the product with a dry, ber-free cloth.
Do not immerse the product in water.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus full your statutory obligations and contribute to the protection of the
environment.
Technical data
Order no. 1570051 1566297 1566298
Model without relay with relay with relay
Nominal voltage 4 - 30 V/DC 5 V/DC 12 V/DC
Switching capacity
(Ohm resistive load)
according to relay max. 30 W, 50 VA max. 30 W, 50 VA
Switching current
according to relay
max. 3 A
max. 2 A max. 2 A
Switching voltage
according to relay
max. 125 V/DC
max. 125 V/AC
max. 60 V/DC
max. 120 V/AC
max. 60 V/DC
max. 120 V/AC
Contact type according to relay 2 way contacts 2 way contacts
Dimensions
(W x H x D)
18 x 32 x 72 mm 18 x 32 x 72 mm 18 x 32 x 72 mm
Relay contacts placement Relay print image