Certifications

Note A5 - The Linking Sheet has not been evaluated, the acceptability for use with end-product and spacings shall be

determined in the end-product application.

Notes 12A - When mounted in accordance with the manufactures instruction, this switch gets a protection degree of IP 40.

Notes 12B - The Switch body is installed inside of end product; only consider the Actuator as accessible parts.

Notes 12C - Heating test was conducted at ambient temperature of 85 deg C with measured maximum temperature of 87.8

deg C on terminals, the suitability of wire conductors using on the switches terminals shall be determined in end-product

applications.

Notes 13A - When mounted in accordance with the manufactures instruction, this switch gets a protection degree of IP 40.

Notes 13B - The Switch body is installed inside of end product; only consider the Actuator as accessible parts.

Notes 13C - Heating test was conducted at ambient temperature of 85 deg C with measured maximum temperature of 100.8

deg C on terminals, the suitability of wire conductors using on the switches terminals shall be determined in end-product

applications.

^Note 1 - UL61058-1 - These are lighted switches employing a lamp. The usable lamp life has not been evaluated.

^Note 2 - UL61058-1 - The device is factory wiring with terminals that do not allow the wire to be removed once inserted.

^Note 3 - UL61058-1 - Only the Button is considered as accessible parts to users. For rest parts of the switches that shall be

enclosed with a suitable enclosure, and the acceptability shall be determined in end-product applications.

^Note 4 - UL61058-1 - The solder type terminal has evaluated the solderability of 260 degree of C.

Marking: Company name or tradename "SCI" or trademark , , , catalog, model or

part number, electrical ratings and the Recognized Component Mark, on the product or on the smallest unit

container in which the product is packaged.

Last Updated on 2019-01-14

The appearance of a company's name or product in this database does not in itself assure that products so identified have been

manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified

and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions:

1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their

entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from

the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the

Page 4

of 4

SWITCHES, APPLIANCE AND SPECIAL USE - COMPONENT | UL Product iQ

08.04.201

htt

s://i

.ul

ros

ector.com/en/

rofile?e=16384