Datasheet

Features

˙Low Power consumption

˙General purpose leads

˙Selected minimum intensities

˙Available on tape and reel

˙Pb free

Descriptions

˙The LED lamps are available with different

colors, intensities, epoxy colors, etc

Usage Notes:

˙Surge will damage the LED

˙When using LED, it must use a protective resistor in series with DC current about 20mA

Applications

˙Status indicators

˙Commercial use

˙Advertising Signs

Distributed by Conrad Electronic SE • Klaus-Conrad-Str. 1 • D-92240 Hirschau

Datasheet

Item no. 1573765

V1_0617_01_DT_ds_en

PAGE 1
Distributed by Conrad Electronic SE • Klaus-Conrad-Str. 1 • D-92240 Hirschau Datasheet Item no.
PAGE 2
Device Selection Guide Chip Material Emitted Color AlGaInP Green Package Dimensions Notes: ˙Other dimensions are in millimeters, tolerance is 0.25mm except being specified. ˙Protruded resin under flange is 1.5mm Max LED. ˙Bare copper alloy is exposed at tie-bar portion after cutting.
PAGE 3
Absolute Maximum Rating (Ta=25℃ ℃) Parameter Symbol Absolute Maximum Rating Unit Forward Pulse Current IFPM 100 mA Forward Current IFM 30 mA Reverse Voltage VR 5 V Power Dissipation PD 140 mW Operating Temperature Topr -40～+80 ℃ Storage Temperature Tstg -40～+100 ℃ Soldering Heat (5s) Tsol 260 ℃ Electro-Optical Characteristics (Ta=25℃ ℃) Parameter Symbol Min. Typ. Max.
PAGE 4
Typical Electro-Optical Characteristics Curves Relative Intensity VS. Wavelength Forward Current VS.Forward Voltage 25 Forward Current (mA) Relative Intensity (a.u) 1.0 0.8 0.6 0.4 0.2 0.0 500 550 600 650 20 15 10 5 0 700 1.0 1.5 Wavelength (nm) 2.5 3.0 3.5 Forward Voltage (V) Relative Intensity VS. Ambient Temp Forward Current VS.Relative Intensity 2.0 2.0 Relative Intensity (a.u) Relative Intensity (a.u) 2.0 1.5 1.0 0.5 0.0 25 30 35 40 45 50 55 60 65 70 75 1.5 1.