Manual

CAUSE
Emptyfueltank
Primerbulbwasn'tpressedenough
Engineflooded
Oldorimproperlymixedfuel
Fouledsparkplug
Pluggedsparkarrestor
EZ-Startleverwasn'tflipped
ACTION
Fillfueltankwithproperlymixedfuel
Pressprimerbulbfullyandslowly7-9times
Usestartingprocedure(withtheEZ-StartTM lever clicked)
Drain gas tank and add fresh fuel mixture
Replace or clean the spark plug
Clean or replace spark arrestor
Flip EZ-Start lever
CAUSE
Air filter is plugged
Old or improperly mixed fuel
Improper carburetor adjustment
CAUSE
Old or improperly mixed fuel
Improper carburetor adjustment
Cutting attachment bound with grass
Dirty air filter
Plugged spark arrestor
CAUSE
Old or improperly mixed fuel
Improper carburetor adjustment
Fouled spark plug
Plugged spark arrestor
CAUSE
Cutting attachment bound with grass
Cutting attachment out of line
Inner reel bound up
Cutting head dirty
Line welded
Line twisted when refilled
Not enough line is exposed
CAUSE
Oil, cleaner or lubricant in cutting head
ACTION
Replace or clean the air filter
Drain gas tank and add fresh fuel mixture
Adjust carburetor
ACTION
Drain gas tank and add fresh fuel mixture
Take to an authorized service dealer for adjustment
Stop the engine and clean the cutting attachment
Clean or replace the air filter
Clean or replace spark arrestor
ACTION
Drain gas tank and add flesh fuel mixture
Take to an authorized service dealer for adjustment
Replace or clean the spark plug
Clean or replace spark arrestor
ACTION
Stop the engine and clean cutting attachment
Refill with new line
Replace the inner reel
Clean inner reel and outer spool
Disassemble, remove the welded section and rewind
Disassemble and rewind the line
Push the bump knob and pull out line until 4 inches
(102 mm) of line is outside of the cutting attachment
ACTION
Clean and thoroughly dry the cutting head
If further assistance is required, contact your authorized service dealer.
19