Manual

_!_a _ Air Fi!ter
Aaju ia!espeea
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
tf aAer che_Ei#g _be _uel a_id _l_ni_ig t[ie ai_f'il_e_ithe
t_3tlows
Checking the fuel, cleaning the air filter, and adjusting
the idle speed should solve most engine problems, If not
and all of the following are true:
* the engine will not idle
* the engine hesitates or stalls on acceleration
* there is a loss of engine power
Have the carburetor adjusted by an authorized ser,o4Cedealer.
,Idle Adjustment Screw
/
ROCKER ARM CLEARANCE
I his requires disassembly of the engine. If you feel
unsure or unqualified to perform this, take the unit to an
authorized service center.
NOTE: Inspect the valve to rocker arm clearance with a
feeler gauge after the first 10 hours of operation
and then every 25 hours of operation thereafter.
* I he engine must be cold when checking or adjusting
the valve clearance.
1.
I his task should be performed inside, in a clean,
dust free area.
I_emove the muffler cover by pressing down on it,
separating it from the engine cover. Using a flat
blade screwdriver, disengage the middle and front
tabs and slots first. I he cover will hinge off' from the
rear tab [Fig. 51).
Eng
2. I,Zemove the two (2) screws on top of the engine cover
with a Flat-head or 1-20 I orx screwdriver (Fig. 52).
Top View Of The Engine
Engine Cover ....