Manual

Section 8
Specifications
Engine Type ..................................................................... Air-Cooled, 2-Cycle
Displacement ................................................................... 1.37 cu. in. (22.5 cc)
Clutch Type ........................................................................... Centrifugal
Idle Speed RPM .................................................................... 2,600-3,600 rpm
Operating RPM (Trimmer( ............................................................ 7,700-8,600 rpm
Ignition Type ............................................................................ Electronic
On/Off Stop Control ................................................................... ToggleSwitch
Lubrication ........................................................................ Fuel/Oil Mixture
Fuel/Oil Ratio ............................................................................... 32:1
Fuel ................................................................................... Unleaded
Carburetor ................................................................... Diaphragm, All-Position
Starter .............................................................................. Auto Rewind
Muffler ......................................................................... Baffled with Guard
Throttle ...................................................................... Manual Spring Return
Fuel Tank Capacity ................................................................... 20 oz (591 ml)
Drive Shaft Housing .................................................................. Aluminum Tube
Throttle Control ................................................................... Finger-Tip Trigger
Unit Weight (No Fuel, with D-handle, Cutting attachment shield and Cutting attachment) ........... 9.3 Ibs (4.22 kg)
Cutting Mechanism ..................................................... AFSTM Dual String Cutting Head
Line Spool .............................................................. Automatic Line Feed Releaser
Line Spool Diameter .............................................................. 3 inches (76.2 ram)
Trimming Line Diameter ........................................................ 0.080 inches (2.03 mm)
Cutting Path Diameter ............................................................ 15 inches (38.1 cm)
2O