Manual

SECTION4: KNOWYOURSTRINGTRIMMERMOWER
Control
Control Lever
-Electric Start
Handle
Trimmer
]eflector Assembly
_indle Assembly
String Cutting
Blad_
Trimmer Line
Figure 4
Read this operator's manual and safety rules before
operating your string trimmer mower. Compare the
illustrations in Figure 4 with your string trimmer mower
to familiarize yourself with the location of various
controls and adjustments. Save this manual for future
reference.
Control Lever
The control lever must be depressed to engage the
spindle assembly. See Figure 4.
Control Lock Bracket
The control lock bracket islocated on the upper right
handle. It isused to keep the spindle assembly
disengaged while the engine is running. See Figure 4.
Starter Handle
The starter handle isattached to the right upper handle,
Stand behind unit and pull the starter handle to start
engine. See Figure 4.
Trimmer DeflectorAssembly
The trimmer deflector assembly is connected to the
trimmer base and it is used to prevent yard debris from
being thrown. See Figure 4.
Spindle Assembly
The spindle assembly rotates the trimmer line.
Trimmer Line
The trimmer line isattached to the spindle assembly
and it is used to trim grass or weeds.
ThrottleControl Lever (Not Shown)
The throttle control lever is located on the engine. It
controls the engine's speed and stops the engine. See
separate engine manual packed with unit for details.
EngineControls
See the separate engine manual for the location and
function of the controls on the engine.
ElectricStarter
The electric starter is located between the upper
handle. Stand behind unit and turn key to start engine.
HandleConnectors
The handle connectors are oneach side between lower
and upper handle, They are used to lock the upper
handle in a set position, See Figure 4,
StringCutting BladeBracket
The string cutting blade bracket is attached to the
trimmer deflector assembly, It is used to cut the trimmer
StoppingEngine
Release control lever to disengage the spindle
assembly and to lock it inthe control lock bracket.
Move throttle control lever to STOP or OFF
position.
Disconnect spark plug wire from spark plug and
ground against the engine.
line if it is too long. See Figure 4.