Manual

ModelsJ609&T609
REE PART
NO. NO.
1 732-0614
2 716-0231
3 736-0336*
736-0337*
736-0349*
4 736-0335
5 710-1325
6 719-04017
7 711-1109
8 741-0335
9 717-1464
10 716-0108
11 741-0340
12 721-0338
13 618-04041
14 741-0336
15 717-04056
17 718-04045
19 711-04134
20 736-0495*
736-0494*
21 741-0337
22 611-0011
23 741-0862
24 732-0863
25 719-04018
26 717-0678
27 761-0202
28 710-1206
29 661-0001
-- 737-0148
DESCRIPTION
Ring, Wire
Ring, E Type,.750
Flat Washer, 5/8 x 1.0 x.030
Flat Washer, 5/8 x 1.0 x.040
Flat Washer, 5/8 x 1.0 x.020
Washer, Thrust.635 x 1.26 x.06
Self-tapping Screw, 1/4-20 x 1.625
Upper Housing
Input Shaft
Needle Bearing,.625 x.813 x.495
14-tooth Bevel Pinion
Retaining Ring,.437
Sleeve Bearing,.75 x.1.0 x 1.0
Seal,.75 x 1.0 x.125
Differential Assembly
Flange Bearing, 5/8 x 3/4 x 3/4
42-tooth Bevel Gear
Clutch Collar
Drive Shaft
Thrust Washer, 1.0 x.632 x.0
Fiat Washer,.632 x 1.00 x.035
Flange Bearing, 5/8 x 3/4 x 15/16
Detent Shaft Assembly
Detent Ball
Compression Spring
Lower Housing
Brake Puck
Brake Disc
Self-tapping Screw, 1/4-20 x 2.375
Brake Assembly
Grease (19 oz.)
*Use applicable washers (ref. no.'s 3 or 20) in this application allowing.0150/.0020 in. end-play.
NOTE: If rebuilding the upper housing, include two ounces (2 oz.) of Unirex ® N3 grease (Part No. 737-0289) in the input shaft cavity.
35