Manual
Tighten the screw, loosened earlier, to secure the
belt tension spring to the transmission, and
reassemble the front drive cover.
_ blade
Hex Bolt
Figure 20
SECTION8: OFF-SEASONSTORAGE
If you are not going to use the mower for more than 30
days or more, prepare the equipment for storage.
_ WARNING: Be sure to disconnect the
spark plug wire and De-energize starter
before performing any repairs or
maintenance. DO NOT attempt any
maintenance or service to the engine and or
mower equipped with the safety key in the
unlocked and or energized mode.
WARNING: NEVER assume starter is de-
energized, even if the key is in the locked
position and or removed from the engine.
ALWAYS de-energize starter prior to
performing any maintenance or service to
the engine and or mower. Follow instructions
on the engine and or machine to de-energize
starter.
Clean and lubricate mower thoroughly as described
in the lubrication instructions.
Refer to accompanying engine manual for engine
storage instructions.
Coat mower's cutting blade with chassis grease to
prevent rusting.
Store mower in a dry, clean area. Do not store next
to corrosive materials, such as fertilizer.
NOTE: When storing any type of power equipment in
an unventilated or metal storage shed, care should be
taken to rust-proof the equipment. Using a light oil or
silicone, coat the equipment, especially cables and all
moving parts.
16