Installation Sheet

4/21/2015
2
5. Connect the black fixture lead to the black wire in the outlet box.
Fasten the joined wires as in step 4.
.
6. To prevent water from flowing into the outlet box
put a bead of weatherproof caulking
or silicone sealant around the inside edge of the back.
DO NOT PLUG THE DRAIN HOLE !
7. Using the end nut and sealing fasten the fixture to the outlet box.
8. Install the lamps ( light bulbs).
NOTE: This fixture is rated for Max 60 watt type B BA C or CA lamp.
WARNING
DO NOT EXCEED RECOMMENDED WATTAGE!
9. Install the glass to the cage with the thumb screw.
10. Restore power to circuit at breaker or fuse box.
electrical tape
approved fastener
(
wire nut
)
Lamp
Back plate
Glass
End nut
Socket
Cage
Thumb screw
Outlet box
Screw
Green screw
Mounting ring