Installation Sheet

8/14/2015
2
with electrical tape so that the connection seals the end of the fastener.
WARNING
Make sure that there is no exposed wire or strands that
could cause a dangerous short circuit !
4. Connect the black fixture lead to the black wire in the outlet box.
Fasten the joined wires as in step 3.
.
5. Fasten the fixture to the wall use screws.
6. Install the lamps ( light bulbs). NOTE: This fixture is rated for Max 60 watt type B lamps Or Early electric lamps.
WARNING
DO NOT EXCEED RECOMMENDED WATTAGE!
7. Assemble the glass on fixture use socket sleeve and ring with ring sleeve.
8. Restore power to circuit at breaker or fuse box.
electrical tape
approved fastener
(wire nut)
Outlet box
Green screw
Mounting bar
Mounting screw
Wire nut
Screw
Glass
Bulb
Socket sleeve
Socket ring
Ring sleeve
Allen wrench