Instructions / Assembly

7/20/2020

4. Fasten the white fixture lead to the white wire in the outlet box.

Fasten the wires together with an approved fastener (wire nut).

Starting about 1' below the fastener, tightly wrap the connection

with electrical tape so that the connection seals the end of the fastener.

WARNING

Make sure that there is no exposed wire or strands that

could cause a dangerous short circuit !

5. Connect the black fixture lead to the black wire in the outlet box.

Fasten the joined wires as in step 4.

6. Fasten the fixture to the outlet box using nut.

7. Place the sleeve onto the socket.

8. Place the shade onto the socket well.

9. Install the lamps (light bulbs). NOTE: This fixture is rated for 40 watt type B lamp.

WARNING

DO NOT EXCEED RECOMMENDED WATTAGE!

10. Restore power to circuit at breaker or fuse box.

electrical tape

approved fastener

(

wire nut

)

Nipple

Outlet Box

Green

screw

1-piece bar

Lamp

Socket

Hex nut

Scre

Sleeve

Shade