Installation Guide Owner manual

DIMM Installation Guide
Hewlett-Packard 2300 Printers:
IMPORTANT: Ensure the printer power is switched OFF, and then disconnect the printer power cord
from the AC wall outlet.
1. Depress the two buttons located at the rear of the printer, and pull the cover open (Figures 1 and 2).
2. Unhinge the cover, and remove the cover from the printer (Figure 3).
Figure 1
NOTE
Figure 2
Figure 3
: If assistance is required for removing or installing the DIMM, please call TROY Technical
Support at [phone]. Customers outside the United States, please call [phone].
Document #50-70395-001 Rev. D
Page 11 of 22