Installation Guide

Chute

Deflector

Spring

Latch

Knobs

Chipper

Chute

Lock Rod

A. Pivot the spring latch

upward, if equipped.

B. Pivot chipper chute

down until it clicks

into the lock rod, if

equipped.

A. Place opening of bag completely over

chute deflector and knobs.

B. Pull the drawstrap until the bag is tight

around chute deflector opening.

(Model Series CS 4325 Only)

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY

AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .

Need Help? Call 1-888-TO-HELP-U

PAGE 1
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS. PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR. 1 (Model Series CS 4325 Only) A. Place opening of bag completely over chute deflector and knobs. 2 B. Pull the drawstrap until the bag is tight around chute deflector opening. A. Pivot the spring latch upward, if equipped. B B. Pivot chipper chute down until it clicks into the lock rod, if equipped.
PAGE 2
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS. PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR. 3 Pour the entire contents of the oil bottle (included in carton) into the oil fill. Move the choke control into the Choke position. Gas Cap 4 Fill fuel tank with gasoline purchased within the last 10 days and stored in a non-rusty/dirty can. Do not fill above base of fuel tank neck.