Use And Care Manual

ASSEMBLY

WARNING:

To avoid serious personal injury and

damage to the unit, shut the unit off before removing or

installing blower tubes or nozzles.

Fig. 1

Blower Outlet

Upper

Blower Tube

Tab

Slot

WARNING:

To prevent serious personal injury, never

operate the unit without the upper blower tube firmly

installed.

ASSEMBLING THE UNIT

• Always install the upper blower tube.

• The general use tube and special use tube are optional.

• Use the general use tube for most operations.

• Only use the special use tube to concentrate and intensify the

air flow when needed. DO NOT use the special use tube for

general work or for long periods.

Installing the Upper Blower Tube

1. Set the unit on a flat, level surface.

2. Align the slo

t on the upper blower tube with the tab on the

lower outlet (Fig. 1).

3. Push the upper blower tube onto the blower outlet until the tab

locks securely into the slot (Fig. 1).

Installing the General Use Tube or Special Use Tube

1. Set the unit on a flat, level surface.

2. Align the tab on the general use tube or special use tube with

the hole on the upper blower tube (Fig. 2).

3. Push the general use tube or

special use tube into the upper

lower tube until the tab locks securely into the hole (Fig. 2).

Removing the General Use Tube or Special Use Tube

1. Set the unit on a flat, level surface.

2. Firmly press the tab on the general use tube or special use tube

inward and pull the general use tube or special use tube out of

the upper blower tube (Fig. 2).

Fig. 2

Upper Blower Tube

General Use Tube or

Special Use Tube

Hole

Tab