Instructions / Assembly

Not for
Reproduction
Copyright © 2019. All rights reserved. Troy-Bilt® is a registered trademark of MTD Products Inc., used under license. No part of this material may be reproduced or
transmitted in any form without the express written permission of Briggs & Stratton Corporation.
Every effort has been made to ensure that the information in this document is accurate and correct. However, we reserve the right to alter or otherwise improve the
product and this document at any time without prior notice and without incurring obligation.
80070006 Rev. A
Recoil Starter
Oil Fill/Dipstick
Spray Tips
Spray Wand
Spray Gun
High Pressure
Outlet
Water Inlet
Engine Switch
High Pressure
Hose
Fuel Cap
8
7
6
1
4
3
2
1
2
5
9
Connect Spray Tip
and Wand to Gun
Switch Off
Switch On
Working CO Alarms
Lubricate O-Rings
Add Oil and Fuel
Purge System
Connect Garden Hose
Outdoor
Use Only
Pull Recoil
Shutdown
Place Outdoors
Purge System
Connect Hose
Start Up
10
Items Included:
QUICK START UP / SHUTDOWN GUIDE
WARNING! Risk of eye injury. Spray could splash
back or propel objects resulting in serious injury.
• Always wear indirect vented (chemical splash) safety
goggles when using or near this product.
• Always wear protective clothing such as long-sleeved shirts,
long pants and closed-toed shoes.
The quick start up/shutdown guide is not a substitute for
reading the manual; the manual contains detailed
information and instructions that you must be aware of and
follow in order to maintain the equipment properly and use it
safely. Remember to record the date of purchase and model number in
your manual.
Handle and Accessory Tray Attachment
Items needed:
(not included) • Grease • Garden hose, 50 ft. (15 m) or less • Safety goggles (indirect vented type) • Pump Saver™