Operation Manual

6 EN
tower fan TVE 36 T
Connecting the power cable
• Insert the mains plug into a properly secured mains
socket.
Operation
Operating elements
15
14
7
8
9
13
12
11
10
No. Designation Meaning
7 ON/OFF button Switching the device on and off
8 OSC button Activating and deactivating the
oscillation function
9 TIMER button Timer function for switch-on and
switch-off
Setting the number of hours of the
activated timer
10 Oscillation
indication
Indicates whether the oscillation
function is activated
11 Fan stage
indication
Indicates the set fan stage
12 Hours LEDs Indication of the number of hours of
the activated timer (1h, 2h, 4h)
13 Operating mode
LEDs
Indicates the selected operating
mode:
= normal operation
= natural wind
= night mode
14 Fan stage button • Setting the fan stage (1-3)
stage1 = low fan speed
stage2 = medium fan speed
stage3 = high fan speed
15 MODE button Selecting the operating mode:
normal operation
natural wind
night mode
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Press the ON/OFF button(7).
ð An acoustic signal is emitted and the device starts up in
normal operation mode at fan stage1.
Setting the operating mode
The device has the following operating modes:
• normal operation
• natural wind
• night mode
Normal operation
In normal operation mode the fan keeps running at the desired
fan stage. The fan stage can be set from 1 to 3 in this operating
mode and is shown on the fan stage indication(11).
Please proceed as follows to set the fan stage in normal
operation mode:
1. Press the MODE button(15) until the =normal operation
LED lights up among the operating mode LEDs(13).
ð The device runs in normal operation mode.
2. Press the fan stage button(14) to switch between the fan
stages.
ð The selected fan stage is indicated by the fan stage
indication(11).
ð The device keeps running at the set fan stage.
Natural wind
In natural wind mode, the fan speed automatically increases
and decreases alternately to generate a pleasant, natural air
stream. You can set the fan stage manually from 1 to 3 in this
mode.
Please proceed as follows to activate natural wind mode:
1. Press the MODE button(15) until the = natural wind LED
lights up among the operating mode LEDs(13).
ð The device switches to natural wind mode.
2. Press the fan stage button(14) to switch between the fan
stages.
ð The selected fan stage is indicated by the fan stage
indication(11).