TTR 400 / TTR 400 D / TTR 500 D EN TRT-BA-TTR400-400D-500D-RE-002-EN User instructions Adsorption DehumidiFier
Description of symbols Table of contents 1. Notes on how to use the manual.................................................2 Description of symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Typographical conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Scope of delivery ........................................................................2 3. Warranty.....................................................................................2 4.
• D o not apply any liquids to the interior of the device. If this does happen nevertheless, pull out the power cord and have the device checked and/or repaired by the Trotec customer service. 4. General safety instructions Please observe the following safety instructions! Any non-compliance with these instructions may have serious consequences for the health of persons and could result in property damage and damage to the environment.
Functional principle TTR 400D/500D Adsorption dehumidifiers work with a drying wheel (rotor) consisting of layers of flat and corrugated fibres with a chemically bound silica gel. This generates a honeycomb structure with numerous axial air channels with a large surface and direct connections to the inner pore structure of the silica gel.
Optional accessories 7. Description of device For operation of the dehumidifier, the following accessories are available: • Hose adapter for installation at the intake cover (12) Structure and components • Air filter box with tube/hose port for Z line filter G4 to F9 • Hygrostat with Tuchel plug for connection socket (9) 1 2 • Combined meter for operating hours and energy consumption For the technical data and order conditions, please contact the Trotec customer service. 8.
upstream of the fan. However, this leads to an unnecessary and often considerable increase in noise and energy consumption. This device is equipped with a variable-speed high performance fan for each air stream to supply the nominal drying and regeneration air flows at maximum speed with connected air hoses (each approx. 10 m long). Additionally, the device features a heating unit generating heat by means of ceramic PTC semiconductor components to heat the regeneration air.
12. Dangerous substances Caution! Damage to the device due to improper handling. Cleaning, maintenance and repair of electric and mechanical components may only be carried out by trained personnel or the Trotec customer service. Replacing the filter The intervals for replacing the filter depend on air contamination and filter quality. Contaminated filters affect the efficiency of the dehumidifier.
Additionally, the air that is taken in by the device must not contain any substances with melting points below 200 °C! Immediately before commissioning the dehumidifier, the following requirements must be fulfilled: • T he dehumidifier may only be used according to the parameters specified in chapter "Technical data". • M ake sure that the air inlet and air outlet (drying air and humid air) are not covered. • C heck if all filters as well as covers and protective grids are in place and tightened.
15. Troubleshooting Error Diagnosis Possible cause Remedy No dehumidification Drying air does not show any Rotor drive defective temperature increase Check the rotor drive and repair if necessary Ampere meter displays consider- Heating unit defective ably deviating values Replace heating unit Ampere meter displays deviating Insufficient regeneration air flow values Check free air flow, check flan, clean or replace the air filter 16.
PE S1 1 2 4 230VAC <16A 3 XS2 XB2 r.H 2 1 2 1 PE 2 1 PE Hygrostat Optional 3 3 3 K1 11 K1 12 Optional P2 P1 XS3 XB3 N 1 R1 kWh Stundenzähler Lin Lout N 4 3 2 Stundenzähler Lin 4 3 2 1 4 3 2 1 E1/ge PE/gg M1 N/bl ~ M GND/bl DC Out/rt L1/bl 21 Gehäuse/housing 22 K1 4 3 2 1 XB1 sw=schwarz/black rt=rot/red ge=gelb/yellow bl=blau/blue gg=gelb-grün 0-10/20A A A1 E1 ge power relay K1 rt ~ M M2 air-dehumidifier TTR 400 E-EA-400-0006/01 Titel no./rev.
PE S1 1 2 4 230VAC <16A 3 XS2 XB2 r.H 2 3 1 2 1 PE 2 1 PE Hygrostat Optional 3 3 K1 11 K1 12 4 Optional P2 P1 XS3 N 1 R1 kWh Stundenzähler Lin Lout N 4 3 2 Stundenzähler Lin 2 1 3 2 1 XB3 4 3 ~ M PE/gg M1 GND/bl N/bl E1/ge DC Out/rt L1/bl 21 M2 G1 T1 L + 24VDC M 24V+ 24V+ + XS1 potentiometer power relay G1 K1 rt ~ M M3 PE air-dehumidifier TTR 400D E-EA-400D-0011/02 Titel no./rev. Trotec GmbH & Co.KG Grebbenerstr.
S1 2 230VAC <16A 1 3 4 XS2 XB2 r.
Dimensions TTR 400 402 350 Ø 124(DN125) 276 70 380 406 Ø 79 DN80) 379 175 45 20 67 289 47 402 379 Ø 124(DN125) 256 Dimensions TTR 400D 175 20 276 71 380 407 Ø 79(DN80) 350 67 45 289 47 256 Dimensions TTR 500D 200 452 429 315 456 Ø 79(DN80) Ø 124(DN125) 73 20 85 429 400 45 339 47 306
Spare parts TTR 400 14 4 1 2 8 9 30 3 10 28 11 27 12 25 13 26 15 24 16 23 17 7 6 22 21 32 29 20 5 31 19 18 Item Designation Article number Item Designation Article number 1 Housing P 1000 1276 17 Ampere meter P 1000 0179 2 Cover P 1000 1276 18 Operating hour counter P 1000 1137 3 Panel P 1000 1276 19 Cable bushing P 1000 1247 4 Rotor cartridge P 1000 1276 20 Filter mat P 1000 0671 5 ADS filter hood P 1000 1276 21 Gear motor P 1000 1038 6 C
Spare parts TTR 400D 33 32 17 4 1 25 2 9 10 35 3 12 11 14 30 13 29 15 31 16 8 18 28 19 20 27 7 26 37 23 34 24 6 5 36 Item Designation Article number Item Designation Article number 1 Housing P 1000 1276 20 Ampere meter P 1000 0179 2 Cover P 1000 1276 21 Operating hour counter P 1000 1137 3 Panel P 1000 1276 22 Cable bushing P 1000 1247 4 Rotor cartridge P 1000 1276 23 Filter mat P 1000 0671 5 ADS filter hood P 1000 1276 24 Filter mat P 1000
Spare parts TTR 500D 31 30 16 4 1 24 2 9 12 33 10 3 11 13 14 29 15 28 17 8 18 27 19 26 20 7 25 35 32 22 23 6 5 Item Designation Article number Item Designation Article number 1 Housing P 1000 1277 19 Ampere meter P 1000 1234 2 Cover P 1000 1277 20 Operating hour counter P 1000 1137 3 Panel P 1000 1277 21 Cable bushing P 1000 1247 4 Rotor cartridge P 1000 1277 22 Filter mat P 1000 0671 5 ADS filter hood P 1000 1277 23 Filter mat P 1000 0673 6
EC Declaration of Conformity TROTEC® GmbH & Co. KG Grebbener Straße 7 D-52525 Heinsberg hereby declares that the dryers described below ty with the EU guidelines stated herein with respect to construction, as well as the type of model placed on the market. are their in conformiconception and Important notice: Any improper use, installation, servicing etc. or any unauthorised alterations carried out on the factory-made appliance render this declaration null and void.
Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.
