Operation Manual

5 EN
Operating manual – dehumidifier TTP 1 E / TTP 2 E
• Make sure that no curtains or other objects interfere with
the air flow.
• When positioning the device, particularly in wet areas,
secure it locally with an RCD (residual current device)
which complies with the respective regulations.
Inserting the condensation tank
• Ensure that the float inside the condensation tank is
inserted correctly.
• Ensure that the condensation tank is empty and inserted
correctly.
Connecting the power adapter
• Plug the power adapter cable into the device's mains
connection.
• Plug the power adapter into a properly fused mains socket.
Operation
• Avoid open doors and windows.
• After being switched on, the device operates fully
automatically.
Operating elements
7
6
No. Designation
6 Indicator LED:
illuminated blue when the device is ready for operation
flashes blue if the power adapter is defective
flashes red when the water tank is full or the float is
incorrectly positioned
7 On/off switch
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Press the on/off switch(7).
ð The LED at the on/off switch is illuminated in blue.
ð The fan switches on.
ð The device starts to dehumidify.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
• Hold onto the mains plug while pulling the power cable out
of the mains socket.
• Empty the condensation tank, if need be.
• Clean the device according to the Maintenance chapter.
• Store the device according to the Storage chapter.