Operation Manual

7 EN
dehumidifier TTK 40 E
Setting the timer
The timer has the following functionality:
• automatic switch-off upon expiry of a preset number of
hours (2h or 4h).
Note
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
Automatic switch-off
ü The device is switched on.
1. Press the TIMER button(20) until the LED for the desired
number of hours (2h or 4h) is illuminated.
2. Wait for approx. 5seconds in order to save the setting.
ð The timer setting equals the desired number of hours.
ð The device switches off after the set period of time.
Note regarding automatic switch-off:
• Pressing the ON/OFF button(16) deactivates the automatic
switch-off function.
Auto stop function
If the water tank is full, not inserted correctly or the desired
relative room humidity has been reached, the device will stop
automatically.
Operation with hose attached to the condensation
connection
For continuous operation or unattended dehumidification, please
connect a suitable condensation drain hose to the device.
ü A suitable hose (diameter= 1/2") is ready for use.
ü The device is switched off.
1. Take the condensation tank out of the device.
2. Remove the sealing cap from the hose connection.
3. Remove the rubber plug.
4. Attach the rubber plug to the drain located within the
device.
5. Put the condensation tank back in.