Operation Manual

7 EN
cordless baton screwdriver PSCS 10-3,6V
Technical data
Parameter Value
Model PSCS10-3,6V
Nominal voltage 3.6 V
Idle speed 200 rpm
Torque settings 6 +1
Tool holder Hexagon tool holder with
locking mechanism
Max. drilling diameter
Wood
Metal
6 mm
4 mm
Max. torque 4 Nm
Weight 380 g
Battery (integrated)
Type Li-ion
Nominal voltage 3.6 V
Capacity 1500 mAh
Charger PSCS 10-3.6V AC
Input
Nominal voltage 100 - 240 V ~ 50 - 60 Hz
Power consumption 8 W
Output
Nominal voltage 5 V
Charging current 600 mA
Charging time 3 h
Protection class
II /
Sound values according to EN60745
Sound pressure level 63 dB(A)
Sound power level 74.1 dB(A)
Uncertainty K 3 dB(A)
Vibration information according to EN60745
Vibration emission value
drilling in metal / screwing
ah=in
0.216 m/s
2
Uncertainty K 1.5 m/s
2
Information on noise and vibration:
• The vibration level specified in these instructions was
determined by means of a measuring method standardized
in EN60745 and can be used for a device comparison. The
specified vibration emission value may also be used for a
preliminary assessment of the exposure.
Caution
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
• The vibration level will change depending on the
application of the power tool and may in some cases differ
from the value specified in these instructions. The vibration
load may be underestimated if the power tool is used
regularly in such a way. For a precise estimation of the
vibration load during a certain work period, it is also
important to consider the periods during which the device
is switched off, or is running but not actually employed.
This can reduce the vibration load over the entire work
period significantly.