Operation Manual

EN 12
cordless baton screwdriver PSCS 10-3,6V
Handle position
The handle position can be adjusted to either vertical or
horizontal in order to reach poorly accessible locations more
easily.
1. Set the switch for clockwise/counter-clockwise rotation(5)
to centre position(lock).
2. Press and hold the handle position switch(4).
4
6
12
12
3. Carefully turn the handle(6) clockwise around the rotation
axis until it reaches the horizontal position and locks in
place.
4. Let go of the handle position switch(4).
4
6
12
5. Check whether the handle(6) is firmly seated in the new
position.
Info
When the handle is in horizontal position, the rotational
direction must be selected contrary to the description
in the chapter Selecting the rotational direction. Note
the direction of the arrow on the clockwise / counter-
clockwise rotation switch(5).
Switching the device on and off
1. Check whether the tool and the selected torque setting are
suitable for the intended application.
2. Check whether the workpiece is secured and the worktop
prepared correspondingly.
3. Press and hold the on / off switch(12) during screwing or
drilling.
ð The device operates with the previously selected
settings.
ð The LED work light(13) is illuminated.
12
13
4. Let go of the on / off switch(12) to stop the device.
ð The LED work light(13) turns off.
Info
The motor has an integrated brake that quickly stops
the motor once you let go of the on / off switch(12).
Shutdown
1. Set the switch for clockwise/counter-clockwise rotation(5)
to centre position(lock).
2. If required, allow the device to cool down.
3. Remove the tool from the device (see Start-up chapter).
4. Clean the device according to the Maintenance chapter.
5. Store the device according to the Storage chapter.