Operation Manual

8 Operating manual – Condenser dryer DH 75/110 AX/BX EN
Operating elements
Operation with hose attached to the condensation plug
Positioning the condensation drain hose
1. Ensure that the condensation drain hose is properly connec-
ted to the device and is free of damage.
2. Depending on use, position the end of the condensation drain
hose as follows:
– Position a sufficiently large container (at least 20 litres) be-
side the device and insert the hose end. Check the fill level
of the container regularly.
– Position the end of the condensation drain hose above a wa-
ter drain. For larger distances, a longer hose of the same
type can also be used.
3. Ensure that the condensation drain hose always descends.
No. Operating element
8 HP (high-pressure) reset switch:
Press this push switch, when the fault indicators (9) are lit.
9 Fault indicator
10 LP (low-pressure) reset switch:
Press this push switch, when the fault indicators (9) are lit.
11 Flip switch fan speed:
Position up: low fan speed
Position down: high fan speed
12 Automatic defrost indicator light
13 Control dial hygrostat
14 Operation indicator
30%
80%
20%
60%
13 12 11 10
9 8
14
15x1 mm