Operation Manual

6 Operating manual – Condenser dryer DH 75/110 AX/BX EN
Read this manual carefully before starting or using the
device. Store the manual near the device or its site of use!
• Do not use the device in potentially explosive rooms.
• Do not use the device in atmospheres containing oil, sulphur,
chlorine, acid or salt.
• Do not operate the device in rooms which are pressurised with
acetone, undiluted acids or solvents.
• Set the device in a horizontal and sufficiently stable position.
• Do not expose the device to directly squirting water.
• Ensure that the air inlet and outlet are not obstructed.
• Ensure that the side of the device where the air inlet is found
is kept free of dirt and loose objects.
• Never insert objects or limbs into the device.
• Do not cover or transport the device during operation.
• Do not sit on the device.
• Ensure that all electric cables and hoses outside of the device
are protected from damage (e.g. from animals).
• Only transport the device in an upright position with an emp-
tied condensate pump and tray.
• Dispose of the collected condensation. Do not drink it. There
is a risk of infection!
• The connection may only be performed by an electrically
skilled person.
Intended use
Only use the device DH 75/110 AX/BX as a stationary industrial
dryer for drying and dehumidifying room air, while adhering to and
following the technical data.
Intended use encapsulates:
• drying and dehumidifying:
– production plants, underground rooms
– store rooms, archives, laboratories
– industrial processes and products
– ship engine rooms
– water processing facilities and pump stations
• maintaining the dryness of:
– instruments, devices and files
– electric control devices, boiler plants, turbines and pipe sys-
tems in power plants
– moisture-sensitive loads etc.
• prevention of condensate formation in tranship zones or cool-
ing houses
Personnel qualifications
People who use this device must:
• be aware of the dangers that occur when working with electric
devices in damp areas.
• take measures to protect themselves from direct contact with
live parts.
• have read and understood the operating manual, especially
the Safety chapter.
Maintenance tasks at the electrical equipment or
the air-conditioning technology must only be
carried out by specialist companies for cooling and
air-conditioning or by TROTEC
®
.
Residual risks
Hazardous electric current!
Work on the electrical components must only be carried
out by an authorised specialist company!
Hazardous electric current!
Before any work on the device, remove the mains plug
from the mains socket!
Danger!
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Safety