Operation Manual

12 Operating manual – Condenser dryer DH 75/110 AX/BX EN
Activities for before the start of maintenance
1. Do not touch the power cable with wet or damp hands.
2. Prior to any work, have an electrically skilled person discon-
nect the power cable!
Maintenance tasks at the electrical equipment or
the air-conditioning technology must only be car-
ried out by specialist companies for cooling and air-
conditioning or by TROTEC
®
.
Visual check for dirt in the inside of the device
1. Shine a torch through the opening of the device.
2. Check the inside of the device for dirt.
3. If you can detect a thick layer of dust, proceed as follows:
– Remove the protective housing.
– Clean the device's interior with a lint-free, soft cloth.
– Put the protective housing back on.
Cleaning the housing and air inlets
1. Use a soft, lint-free cloth for cleaning.
2. Dampen the cloth with clean water. Do not use sprays, sol-
vents, alcohol-based or abrasive cleaners to dampen the
cloth.