Operation Manual

EN Operating manual – Condenser dryer DH 15 AX 5
Read this manual carefully before starting or using the
device. Store the manual near the device or its site of use!
• Do not use the device in potentially explosive rooms.
• Do not use the device in atmospheres containing oil, sulphur,
chlorine, acid or salt.
• Do not operate the device in rooms which are pressurised with
acetone, undiluted acids or solvents.
• Mount the device on the wall horizontally and sufficiently sta-
ble.
• Do not expose the device to directly squirting water.
• Ensure that the air inlet and outlet are not obstructed.
• Ensure that the side of the device where the air inlet is found
is kept free of dirt and loose objects.
• Never insert objects or limbs into the device.
• Do not cover or transport the device during operation.
• Do not sit on the device.
• Ensure that all electric cables outside of the device are pro-
tected from damage (e.g. from animals).
• Only use extensions to the connecting cable which are appro-
priate to the device power consumption, the length of its cable
and its use. Avoid electrical overload.
• Only transport the device in an upright position with an emp-
tied condensate pump and tray.
• Dispose of the collected condensation. Do not drink it. There
is a risk of infection!
Intended use
Only use the device DH 15 AX as a stationary industrial dryer for
drying and dehumidifying room air, while adhering to and follow-
ing the technical data.
Intended use encapsulates:
• drying and dehumidifying:
– production plants, underground rooms
– store rooms, archives, laboratories
– industrial processes and products
– ship engine rooms
– water processing facilities and pump stations
• maintaining the dryness of:
– instruments, devices and files
– electric control devices, boiler plants, turbines and pipe sys-
tems in power plants
– moisture-sensitive loads etc.
• prevention of condensate formation in tranship zones or cool-
ing houses
Personnel qualifications
People who use this device must:
• be aware of the dangers that occur when working with electric
devices in damp areas.
• take measures to protect themselves from direct contact with
live parts.
• have read and understood the operating manual, especially
the Safety chapter.
Maintenance tasks at the electrical equipment or
the air-conditioning technology must only be
carried out by specialist companies for cooling and
air-conditioning or by TROTEC
®
.
Residual risks
Hazardous electric current!
Work on the electrical components must only be carried
out by an authorised specialist company!
Hazardous electric current!
Before any work on the device, remove the mains plug
from the mains socket!
Caution!
To avoid damages to the device, never operate the
device without an air filter inserted!
Danger!
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Safety