Operation Manual
5 EN
Operating manual – humidifier B 5 E
Filling the water tank
The water tank should be filled before first use or when the
empty water tank indication(21) lights up.
Notice
Fill the device with fresh drinking water only. The
water temperature must not exceed 40°C.
Scented oil or other additives can damage the plastics
and the nebulizer membrane.
Info
If possible, change the water on a daily basis to
prevent bacterial growth.
1. Remove the water tank(2) from the device by lifting the
water tank at the transport handle(1).
Note that there may still be residual water left in the lower
part(3) if the device was used beforehand.
2
3
1
2. Remove the mist nozzle(14) from the water tank to
prevent the mist nozzle from falling out when the water
tank is turned over.
14
3. Turn the water tank over.
4. Unscrew the lid(15) from the water tank(2).
15
8
5. Fill fresh drinking water (approx. 4l, maximally 40°C) into
the water tank.
6. Insert the SecoSan
®
Stick (optional accessory) into the
water tank.
7. Screw the lid(15) firmly back onto the water tank(2).
8
8. Refit the mist nozzle(14) onto the water tank(2).
14