Operation Manual
EN 12
Operating manual – humidifier B 5 E
14. Screw the lid(15) firmly back onto the water tank(2).
8
15. Refit the mist nozzle(14) onto the water tank(2).
14
16. Refit the water tank(2) into the device.
In doing so, make sure that the arrow points to the front.
Please note that after inserting the water tank, the water
starts to run into the inside of the device immediately.
Cleaning the nebulizer membrane
Depending on the hardness of the drinking water used, deposits
may form on the nebulizer membrane over time. These could
affect the nebulizer performance. Therefore, the nebulizer
membrane should be cleaned on a regular basis.
To do so, please proceed as follows:
1. Remove the water tank(2)and the mist nozzle(14) as
described in Cleaning the water tank.
2. Remove any residual water from the inside of the device.
3. Wet the nebulizer membrane(9) with a conventional
descaling agent (e.g. household vinegar).
4. Let the descaling agent act for approx.2 to 5min.
5. Remove the deposits from the nebulizer membrane(9)
using the brush(11).
9
11
6. Rinse the inside of the device with clear water.
7. Refit the water tank(2)and the mist nozzle(14) as
described in Cleaning the water tank.