Operation Manual

EN 8
Operating manual – humidifier B 24 E / B 25 E
The device gets very warm, is loud or is losing
performance:
• Check the air inlets and air grilles for dirt. Remove external
dirt.
• Check the inside of the device for dirt (see chapter
Maintenance). If necessary, clean the interior of the device
using compressed air.
The device is loud or vibrates heavily:
• Check whether the device is set up in a stable and upright
position.
Note
Wait for at least 3 minutes after maintenance and
repair work. Only then switch the device back on.
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to an authorized specialist electrical company or to
Trotec for repair.
Maintenance
Activities required before starting maintenance
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
• Switch the device off.
• Hold onto the mains plug while pulling the power cable out
of the mains socket.
Warning of electrical voltage
Tasks which require the housing to be opened
must only be carried out by authorised specialist
companies or by Trotec.
Cleaning the housing
Clean the housing with a soft, damp and lint-free cloth. Ensure
that no moisture enters the housing. Protect electrical
components from moisture. Do not use any aggressive cleaning
agents such as cleaning sprays, solvents, alcohol-based or
abrasive cleaners to dampen the cloth.
Cleaning the water tank
The water tank should be cleaned once a week. Use a
conventional descaling agent (e.g. household vinegar) for
cleaning.
1. Remove the upper part from the water tank and put it
aside.
2. Take the evaporation filter out of the water tank.
3. Thoroughly rinse the water tank in a sink or similar.
4. Wipe the water tank dry.