User Manual

Step 5 Assemble Y axis Motor
Parts:
42 stepper motor – 1pcs
GT2-16 Pulley (with grub screw in it)– 1pcs
Limit switch – 1pcs
Y motor mount (Acrylic) – 1pcs
M3-8mm screws – 4pcs
M4-8mm screw – 3pcs
M4 T-Nut - 3pcs
M2-10mm screw – 2pcs
M2 Nut – 2pcs
 Insert the GT2-16 pulley to the motor shaft,
tighten the grub screw in the pulley. Next
assemble the 42 stepper motor and the Y motor
mount(Acrylic) with 4pcs M3-8mm screws .
 Secure the limit switch to motor mount using
2pcs M2-10mm screws and nuts.
 secure the motor mount to the back of the Y
slide rail using 3pcs M4-8mm screws and T-nuts.