User Manual

Step 12 Assemble X axis Endstop & Pulley
Parts:
Belt pulley – 1pcs
Limit switch – 1pcs
X Pulley mount (acrylic) – 1pcs
X endstop mount (acrylic) – 1pcs
M5-25mm screw – 1pcs
M5 Nut – 1pcs
M5 Locknut – 1pcs
M6 washer – 2pcs
M5 washer – 2pcs
M4-8mm screw – 4pcs
M4 T-Nut - 4pcs
M2-10mm screw – 2pcs
M2 Nut – 2pcs
 Secure the limit switch to X endstop mount using
2pcs M2-10mm screws and nuts. Then place the
X endstop mount to the left end of the X slide rail
using 2pcs M4-8mm screw and T-nuts.
 Take 1pcs M5-25mm screw and insert the Pulley
mount, secure it with M5 nut , then insert the
washers and belt pulley , secure them using M5
locknut.
 Secure the X belt pulley assembly on the right of
the X slide rail using 2pcs M4-8mm screws and
nuts.