User Manual

Off-line Printing
Operate the printer with the key-press and LCD screen after print bed is
leveled, as shown below:
You will see the ‘monitoring
interface’ first after power on
Press menu button go into
‘menu screen’.
Press Down key after into
menu, then you will see ‘SD
card’
Press Right key and select
‘SD card’,and then press
Right key select ‘Print file’.
Select a Gcode file which
you want to print, then press
Right key to start print.
You’ll see the monitor
interface when printing, it
shows Nozzle temperature,
and the printing completion
rate.
If want to ‘Pause Print’ or
‘Stop Print’, Press Manu
key ,select ‘SD card’,then
the screen will appear the
interface as left picture .
Select Pause or Stop , press
Right key to confirm.