User's Manual

ENGLISH
Thank you for purchasing the Tronsmart Studio Bluetooth Speaker. Please read the user
manual before use and keep it handy for future reference. If you have any additional
questions or comments, please contact us by email at: [e-mail]
PACKAGE CONTENTS
1 x Studio Bluetooth speaker 1 x 3.5mm audio cable 1 x SoundPulse
®
Card
1 x Type-C charging cable 1 x Warranty card 1 x User manual
Aux-in Mode
Simply connect the speaker with your non-Bluetooth device via the 3.5 mm audio jack cable.
Note: After plugging in an audio cable, the speaker will automatically switch to Aux-in mode.
TF Card Slot Mode
The speaker will play the music from your TF/Micro SD card when plugging the card into the
slot.
$XWR3RZHU2΍
7KHVSHDNHUZLOOSRZHUR΍DXWRPDWLFDOO\DIWHUPLQXWHVLILWGRHVQRWSDLUZLWKDQ\GHYLFH
through Bluetooth or does not play any sound after pairing. When in low battery, the speaker
ZLOOSRZHUR΍DXWRPDWLFDOO\DVZHOO
Reset to Factory Default Settings
Press and hold the Play/Pause button for 5 seconds to reset to factory default settings.
Care & Maintenance
Do not use any form of detergents or cleaning material to clean the product as any type of
chemical may make this device unusable. Do not disassemble this product. It contains no user
serviceable parts. Do not drop or jump on it and treat it with care for the best performance.
Keep the product in a dry location. Dust, dirt & moisture from humidity can accumulate on the
ERG\RIWKHSURGXFWLINHSWDWDQXQIULHQGO\SODFH'RQRWGLVSRVHWKLVSURGXFWLQȴUHRU
batteries may explode or leak.
Warranty Information
Your ‘Tronsmart Studio Bluetooth Speaker’, is warranted to the original owner for 12 months
from the date of purchase against defects in material and workmanship under normal use
and service. Tronsmart is not responsible for the accidental use of this product and its liability
will not exceed the purchase price of the product. If you have any problems while using the
product, please do not hesitate to contact our customer support team at
[e-mail]
.
FCC STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this
device may not cause harmful interference, and 2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in particular installation. If this equipment does cause harmful
LQWHUIHUHQFHWRUDGLRRUWHOHYLVLRQUHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWR΍DQGRQ
the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGL΍HUHQWIURPWKDWWRZKLFKWKHUHFHLYHULVFRQQHFWHG
--Consult the dealer or an experienced radio/TV technician for help.
&KDQJHVRUPRGLȴFDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFHFRXOGYRLGWKHXVHUȇV
authority to operate the equipment.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction.
SHENZHEN GEEKBUY E-COMMERCE CO., LTD.
19th Floor, Galaxy World Tower B, #1 YaBao Rd.,
LongGang District, Shenzhen, China
Email: [e-mail]
800-270-1082
( USAb&bCana da)
[phone] ( Global)
www.tronsmart.com Made in China
Model
Bluetooth
%OXHWRRWKSURȴOH
Audio decoding
Bluetooth transmission
Li-battery Capability
Power
Power supply
Frequency range
Playtime
Standby
Charging time
Dimension
Weight
Studio
5.0
A2DP V1.3, ACRCP V1.4, HFP V1.6
SBC
Up to 10m/33ft (open area)
2000mAh *2
30W
DC 5V/2A, via Type-C port
20Hz - 20000Hz
Up to 15 hours (on a 50% volume)
About 24 months
3 -3.5 hours
8.13 x 2.76 x 2.28 inches / 206.5 x 70 x 58 mm
961g
STUDIO
BLUETOOTH SPEAKER
USER MANUAL
BUTTON CONFIGURATION
Volume - ;
Previous track
SoundPulse;
Voice assistant;
Answer/
End a phone call
TF card slot
Aux-in port
Type-C
charging port
Charging
indicator
Play/Pause;
Reset
Volume + ;
Next track
Connect/
Disconnect Bluetooth;
Three modes switching
Broadcast
mode
Power
ON/OFF
Bluetooth
indicator
SoundPulse
VRXQGH΍HFW
indicator
Broadcast
mode
indicator
HOW TO USE
x 1
2 s
1 s
8 s
x 1
2 s
x 2
x 1
x 2
2 s
x 1
x 1
x 1
5 s
x 1
Note: If you need to pair more than 2 speakers together, please tap the
host speaker once and double tap the other speakers to enter receive
mode.
x 1
x 2
x 2
x 1
HOW TO CONNECT
TO BROADCAST MODE?
INDICATOR
The host
speakers
The vice
speaker
2 s
Pairing mode
Paired successfully
Aux-in play mode
TF card play mode
The host speaker enters broadcast connection mode
The host speaker is successfully connected
The vice speaker is successfully connected
SoundPulse on
6RXQG3XOVHR΍
0-25%
25-50%
50-75%
75%-99%