CV_KH3906_BK45891_LB6.qxd 27.11.2009 13:37 Uhr Seite 1 6 VOLTAGE TRANSFORMER KH 3906 VOLTAGE TRANSFORMER Operating instructions KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www.kompernass.com ID-Nr.
CV_KH3906_BK45891_LB6.qxd 27.11.
IB_KH3906_BK45891_EN_LB6.qxd 10.12.
IB_KH3906_BK45891_EN_LB6.qxd 10.12.2009 10:39 Uhr Seite 2 VOLTAGE Safety information TRANSFORMER KH 3906 • This device is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or who are lacking in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the device is to be used.
IB_KH3906_BK45891_EN_LB6.qxd 10.12.2009 10:39 Uhr Seite 3 Technical data Risk of fire! • Do not use the device near hot surfaces. • Do not locate the device in places exposed to direct sunlight, Otherwise, it may overheat and become irreparably damaged. Do not operate the device in a vehicle that is standing out in the sun. • Do not leave the device unattended when in use. • Do not cover the fan's ventilation slots when the device is switched on.
IB_KH3906_BK45891_EN_LB6.qxd 10.12.2009 10:39 Uhr Operating Elements q w e r t Seite 4 The required power needed for operation can be calculated as follows: Fan (on the rear panel) 12 V vehicle plug On/Off switch AC socket Operation LED/Overload indicator Example Initial operation The power source should also supply at least 14,7 A. Unpacking Attention! 1. Remove the device from the packaging. 2. Remove all foils. Never connect the power inverter to a 24 V supply system.
IB_KH3906_BK45891_EN_LB6.qxd 10.12.2009 10:39 Uhr Connection to a voltage source Seite 5 • Now switch on the load/device to be operated. When switched on a short signal tone can be heard. Attention! Before connecting the power inverter to a voltage source make sure that the on/off switch e on the device is in the position 0.
IB_KH3906_BK45891_EN_LB6.qxd 10.12.2009 10:39 Uhr Seite 6 Television sets • Inductive loads, for example, televisions or stereo systems (devices with an inductor or a transformer) often require a much greater switch on current than resistance loads with the same specified wattage. When switching on, television sets demand much more power than that indicated on the rating plate. Therefore it may be necessary to switch the power inverter on and off several times in order to switch the television set on.
IB_KH3906_BK45891_EN_LB6.qxd 10.12.2009 10:39 Uhr No output power Seite 7 Cleaning the housing: Clean the housing surface with a slightly damp cloth Never use benzene, solvents or detergents that can damage plastics! In the event that the ventilation slots become dusty you can clean these with a soft brush. Possible cause and remedy: • The power inverter is not fully warmed up. Switch the power inverter on and off again until the device attached to the power inverter is supplied with power.
IB_KH3906_BK45891_EN_LB6.qxd 10.12.2009 10:39 Uhr Warranty & Service The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a post-free despatch for your goods be assured.
