Instruction Manual

TLD 2 A1 GB

│

11 ■

NOTE

► Some mobile phones need to be taken out of their

case for charging.

► At ambient temperatures above 25°C, the charging

power is reduced to protect against overheating. This

increases the charging time of your mobile phone.

► The connection socket (USB type-C)

2 cannot be

used as an output.

► Compatible mobile phones are detected automatically.

If the mobile phone is not compatible, the operating

LED 1

5/24 next to the respective charging surface

11/23 ﬂashes blue. In this case, use a suitable

adapter.

♦ Charging starts immediately and is indicated on the

display of the mobile phone. If you are using charging

surface 1

1, operating LED 15 lights up to indicate

charging: operating LED 15 lights up blue continuously.

If you are using charging surface 23, then operating

LED 24 lights up.

♦ The charging progress is shown on the display of the

mobile phone.

♦ Remove the mobile phone from charging surface

1

1/23 and unplug the connection cable6 once

charging is complete.