Installation Instructions

ManualsBrandsTrolMaster ManualsElectronicsTrolMaster Wireless Station

TWS-1

TrolMaster Wireless Station

Read all instructions carefully before installation.

This product is not intended for use by any persons

and children with reduced physical, sensory or mental

capabilities or lack of experience and product

knowledge.

The device is designed to be installed INDOORS IN A

SPACE THAT IS PROTECTED FROM RAIN AND

FLOODING.

DO NOT clean the exterior of the enclosure with any

chemicals that might cause damage. To clean the

enclosure… Use a damp cloth only.

CAUTION

The TWS-1 Wireless Station enables you to use

TrolMaster sensors and devices wirelessly with your

existing Hydro-X Pro Controller (HCS-2). The TWS-1 is

the core of the wireless system, designed to convert

wired and wireless protocols, thus building a scalable,

solid communication link between the HCS-2 controller,

sensors, and devices. The TWS-1 provides a wiring-free

option for TrolMaster’s future wireless product

development, to enhance user experiences by offering

the option to connect sensors and devices wirelessly.

OVERVIEW

Summary of content (7 pages)

PAGE 1
CAUTION 1. Read all instructions carefully before installation. TWS-1 TrolMaster Wireless Station 2. This product is not intended for use by any persons and children with reduced physical, sensory or mental capabilities or lack of experience and product knowledge. 3. The device is designed to be installed INDOORS IN A SPACE THAT IS PROTECTED FROM RAIN AND FLOODING. 4. DO NOT clean the exterior of the enclosure with any chemicals that might cause damage. To clean the enclosure… Use a damp cloth only.
PAGE 2
PACKAGE CONTENT ● ● ● DIMENSION 1 x TrolMaster Wireless Station (TWS-1) 1 x Antenna 2 x Phillips Head Screws (0.05in / 1.28mm) '/ SPECIFICATION 0.98” / 25mm 2.4 ”/ 03 Input Voltage: 12V, 80mA Working Environment: Temperature: 32°-122°F Humidity: ≤90% Wireless Standard: 915Mhz Lora Product Dimensions: Unit: 60mm x 82.5mm x 25mm Screw Size: Phillips Head (0.05" / 1.28mm) RJ12 cable: 16ft (4.9m) Antenna: 6.99" (177.5mm) Product Weight: 0.
PAGE 3
● ● ● The TWS-1 can be mounted directly on any wall surface with appropriate fasteners to secure. (*Do not place TWS-1 inside metal enclosures or else the signal may be affected.) ADDRESSING INSTRUCTIONS How to add the TWS-1 to the Hydro-X Pro make sure that your HCS-2 controller is updated to the most recent firmware. ● Fasten the antenna to the wireless station Connect the wireless station to the Hydro-X Pro’s sensor port to connect sensors or the device port to connect device modules wirelessly.
PAGE 4
WIRELESS PARING INSTRUCTIONS Hydro-X Pro Control System 01:30pm Jan 15,2022 Light Temp General Alarm Setting Calibration Deadband System Reset Screen Lock Import / Export Serial Number Detectors Humid CO2 Devices Advanced ● Press the “Add" button in the top-rigth corner to add a new device.
PAGE 5
Hydro-X Pro Control System 01:30pm Jan 15,2020 Wireless Station Light Channel: 122 Add V2.0 Zone 1 Temp Smart Junction Box Humid Enter CO2 Devices Advanced Historical Chart ● Once the device(s) is paired, it will show up in the "Wireless Station" menu. CAUTION: For instructions on how to pair the specific device/sensor to the TWS-1, please check the manual from the device/sensor unit. FCC Statement This device complies with Part 15 of the FCC Rules.
PAGE 6
WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. ISED Canadia Statement This Class B digital apparatus complies with Canadian ICES-003.
PAGE 7
WARNING : DO NOT allow the TrolMaster Wireless Station to be exposed to water or excessive heat. DO NOT open or attempt to repair or disassemble the module, as there are no user-serviceable parts inside. Opening the module will void the warranty. If the surface of the TrolMaster Wireless Station is dirty, wipe it with a dry towel. The TrolMaster Wireless Station operates under natural ventilation conditions. AVERTISSEMENT : NE PAS exposer la station sans fil TrolMaster à l'eau ou à une chaleur excessive.