User's Manual

The above diagram is one example of a recommended installation. Other

variations are possible. Consult your local mobile electronics installer.

WARNINGS

• The B800-1900-WU complies with FCC regulations. Follow all guidelines and

read this information completely before beginning the installation procedure.

Never operate the system in an unintended application.

•· All cellular phones in the vicinity of the amplifier should be turned off during

installation. Only after unit is installed should cellular phones be turned on

and tested with the system.

• Make sure to connect to a 12-Volt source that is not providing power when

vehicle is turned off - or battery will drain.

• Only the provided power cable is to be used with the Call Capture systems.

Using any other power cable will harm the system. The Call Capture’s warranty

will be voided if any other power cable is used.

• Changes or modifications not expressly approved by Richardson Electronics

could void the user’s authority to operate the equipment.

IMPORTANT:

The Call Capture B800-1900-WU Direct Connect Cellular Signal Enhancer is

for users that have a hands-free kit already installed in their vehicle. Please

read the entire contents of this installation guide before installing the unit.