User's Manual

Step 5. Position Interior Antenna - Position the Small (patch) Antenna as close to, and

with the best unobstructed view to, where the cell phone would normally be used. Avoid

placing this Antenna behind any metallic objects (ie. mirror in sun visor). Do not make

contact with any metal surface. Connect Small Antenna to the Amplifier Unit.

IMPORTANT: There is only one location where Small Antenna can be connected

to Amplifier Unit. For optimal performance, do not affix Small Antenna to the

front windshield.

Step 6. Achieve Optimal Enhancement - Once your LED is Green, you may permanently

affix both the Magnetic Mount and Small Antenna. If LED is Yellow, adjust the position

of the Magnetic Mount Antenna until the LED is Green.

Green LED – Optimal signal enhancement

Yellow LED – Good signal enhancement

Red LED – Poor signal enhancement

Step 7. Quick System Check - Put your cell phone antenna directly next to the Small

Antenna. See how many signal strength bars you have. Next, turn the system off (either

turn vehicle off or unplug unit). You should notice a decrease in signal bar strength. The

exception is if you are in an area where, with the system off, your phone is at full signal

strength. Please note when you turn the system on, if your phone is receiving maximum

signal strength you will not see a difference. In order for this quick test to work, you will

need to test unit in a less than maximum signal strength area.