User manual

IRIS Starter kit - Test program
IRIS-Starter kit-Test programl-1a
4
Predefi ned messages
There can be up to twenty predefi ned messages.
• Message number 1 = ID: “Id number” Alias: “Alias”
• Message number 2 = “Alias” I/O Status: “I/O Status”
• Message number 3 = “Alias” voltage in6: “Input 6 value” limit 1
• Message number 4 = “Alias” voltage in6: “Input 6 value” limit 2
• Message number 5 = “Alias” counter=”Counter 1”
• Message number 6 = “Alias” lost unit
• Message number 7 = “Alias” found unit
Parameters used in the messages.
• “Id number” = the unit’s unique identifi cation number
• “Alias” = the unit’s name.
• “I/O Status” = InputA InputB Output Flag
• InputA = Digital inputs and the lower limit on analogue inputs
• In1,In2,In3,In4,In5,In6
• InputB = The upper limit on analogue inputs
• In1,In2,In3,In4,In5,In6
• Output = Digital outputs
• Out1,Out2,Out3,Out4
• Flag = Digital value of fl ags used for storage
• Flag1,Flag2,Flag3,Flag4,Flag5,Flag6,Flag7,Flag8
• “Input X value” = Analogue or digital value of Input number X.