User manual

IRIS Starter kit - Test program

IRIS-Starter kit-Test programl-1a

I/O event

An I/O event is trigged when one, or more, of the inputs, the outputs and/or the ﬂ ags match a

predeﬁ ned bit pattern.

Input 1-5 is digital in this setup

• Input 1 goes high

• Send a message to the other unit to set Output 1 high

• Input 2 goes high

• Send Message number 1 to the other unit.

• Input 3 goes high

• Increase Counter 1 with 1

• Input 4 goes high and Input 5 goes high

• Send Message number 2 to the serial interface

• Input 5 goes high

• Start Timer 1

Input 6 is analogue in this setup

• Input 6 lower limit = 10V ±1V (Hysteres = 2V)

• Send Message 3 to the other unit.

• Input 6 upper limit= 20V ±1V (Hysteres = 2V)

• Send Message 4 to the other unit.

Output

(diodes)

Input

(buttons)

External I/O