User manual

IRIS Configuration - Manual
IRIS-Confi g-Manual-1a
6
Ping times:
Ping time is used to detect a lost connection it the network. If there is no radio communica-
tion, for a certain time, the unit send a short message to establish contact. The upper unit is, in
most cases, responsible to maintain the radio connection.
Change ping time
• Choose ping time from the list
• To change ping time for the upper unit
• Press “Change upper unit ping time” button.
• To change ping time for a lower unit
• Choose unit from the list to the right
• Press “Change lower unit ping time” button.
Allowed setup:
To prevent unauthorized changes in the IRIS-units settings, it is possible to setup restrictions
on how to change setting.
Change allowed setup:
• All IRIS units:
• It is possible to change settings using any IRIS-unit
·• All IRIS setup units:
• It is possible to change settings using an IRIS setup unit.
• IRIS unit:
• It is possible to change settings using an IRIS-unit with a specifi c identifi cation number.
• Via serial interface:
• It is possible to change settings via the serial interface without using an IRIS-unit.