User manual

IRIS Configuration - Manual
IRIS-Confi g-Manual-1a
16
Output and fl ag actions
Changes the values on its own outputs and fl ags or sends a command to another unit in the
system to change its outputs and fl ags.
Create an output and fl ag action
Set the values on outputs and fl ags and choose a destination.
Double click on the bits to change the values.
Values:
• 0 – Low
• 1 – High
• T – Toggle value
• - – Do not change value
Destinations:
• - – Local command
• Identifi cation number – Another unit
Timer actions
Timer actions control the timers.
• Set time
• Changes the preset end-time.
• Restart timer
• Resets and starts the timer.
• Start timer
• Starts the timer on the value it stopped.
• Stop timer
• Stops the timer. Does not reset it.
Counter actions
Counter actions control the counters.
• Set limit
• Changes the upper limit on the counter.
• Restart counter
• Resets the counter
• Increase counter
• Increases the counter with the selected value.
• Decrease counter
• Decreases the counter with the selected value.