User manual

IRIS Configuration - Manual
IRIS-Confi g-Manual-1a
7
Radio setup
Channel
To avoid interference with other systems it is possible to use different radio channels.
All IRIS units in the same system most use the same channel setting.
• Channel 1-69 is in the 433MHz frequency area
• Channel 70-81 is in the 439 MHz frequency area
Protocol
For now there is only one radio protocol, the IRIS-standard protocol.
If there is a need in the future versions of the program it is possible to add other protocol as
well.
Number of retransmissions
The time between two retransmissions varies to avoid repeated collisions of messages.
• Enter minimum and maximum time in the fi elds
• If minimum time equals maximum time the retransmission time is fi xed.
Broadcast
It is possible to make restrictions in how the IRIS-unit handles broadcast messages.
• To all units
• Send the broadcast message to both the upper unit and the lower units
• Only to lower units
• Send the broadcast message to the lower units
• No broadcast function
• Do not send broadcast messages
Gateway
It is possible to disable the message relay function in the IRIS-unit.
• On
• The IRIS-unit relays messages to other units
• Off
• The IRIS-unit does not relays messages to other units