User manual

IRIS Configuration - Manual
IRIS-Confi g-Manual-1a
3
IRIS confi guration program
The confi guration program helps the user to setup an IRIS-system.
Project
An IRIS-system is two or more IRIS-units communicating with each other, with other elec-
tronic equipment and with the end-user.
To make it easier to administrate and create an IRIS-system, all the units’ confi guration fi les
are stored in the same project folder.
Create a project
Start with creating a confi guration fi le for each unit that are in the system. Make sure that the
identifi cation number and the type of unit is correct. When a fi le represents each of the units it
is time to setup and program the units.
Unit
An IRIS-unit can be used for control, surveillance and relaying information from various
electronic equipments.
Create a unit
Choose ”New IRIS unit” under” the File menu.
New IRIS unit:
• ID number
• All units come with a unique identifi cation number.
• Enter the number of the unit
• Alias
• To make it easier to administrate it is possible at name the unit.
• Enter an alias for the unit. If the unit is not named the alias is equal to the
identifi cation number.
• Type of unit
• There are different kinds of units.
• Choose the type from the list.