Installation Guide

Mounting with drywall anchor Mounting to wooden dry wall stud

E Work steps for drywall mounting with wall anchors

When using drywall anchors, we strongly recommend combining the drywall connection with at least one screw to a stud for a more

solid connection. Be careful not to break the drywall panel.

First Step

Please use a pencil. Bring the products in ﬁnal position and mark the screw-point on the center of the wall. Use a spirit level or have

someone eyeball to make sure the holes are levelled.

Second Step

If you use self-drilling wall anchors a pilot hole is not needed. Use your drill and the 1/16“ bit to make pilot holes for maximum 1

inch to markings. Insert wall anchors (not included). Be careful not to break the drywall panel.

Third Step

Mount the metal holder with screws to the wall anchor make sure the screws are fastened securely.

Final Step

Mount the condo to the metal holder tighten with enclosed nut. Hook the assembled hammock to the mounted metal holder.

Connect the steps to the metal holder and attach cap.

Advice:

Please note the secure assembly and mounting requires one adult person.

E Work steps for drywall with wooden drywall stud

First Step

Use a stud-ﬁnder or other technique to locate the studs. Please use a pencil. Bring the products in ﬁnal position and mark the screw-point

on the center of the stud. Use a spirit level or have someone eyeball to make sure the holes are levelled.

Second Step

Mount the holder with attached screws to wooden studs at pilot markings.

Final Step

Mount the condo to the metal holder tighten with enclosed nut. Connect the steps to the metal holder and attach cap. Use a stud-ﬁnder

or other technique to locate the studs.

Advice:

Please note the secure assembly and mounting requires one adult person.

Aufbauanleitung/Assembling Instruction/Instruction de montage

TRIXIE Pet Products, Inc. · P.O. Box 101196 · Ft. Worth, TX 76185 · USA · www.trixie.de

93975190421

Assembling Instruction

#49923/49924

b4×